FR4 PCB Fabrication and Assembly

NOD Electronics are specialized in the production of carbon ink printed circuit board approved by ISO9001 and ISO2001. Now we are the secondary supplier of Casio with huge production volume.

Laminate : FR-4
Type : Rigid
Layers : Single Layer
Application : Health Care
Surface Finish : HASL
Copper Thickness : 0.5oz
Laminate Thickness : 0.8mm

FR4 (FR = Flame Retardent)is a glass fiber epoxy laminate. It is the most commonly used PCB material. 1.60 mm (0.062inch). FR4 uses 8 layers glass fiber material. The maximum ambient temperature is between 120o and 130oC, depending on thickness.

FR4 (single layer): copper foil + glass fiber fabric

FR4 (double layer): copper foil + glass fiber fabric + copper foil

Our Capabilities of PCB Fabrication

Total Pad SizeStandardAdvanced
Capture PadDrill + 0.008Drill + 0.006
Landing PadDrill + 0.008Drill + 0.006
BC Mechanical Drill (Type III)0.0080.006
Laser Drill Size0.004-0.0100.0025
Material Thickness0.00350.0025
Stacked ViaYesYes
Type I Capabilities single & Double DeepYesYes
Type II Capabilities Buried Vias with MicroviasYesYes
Type III CapabilitiesYesYes
Copper Filled MicroviaYesYes
Smallest Copper Filled Microvia0.0040.0025
Copper Filled Microvia Aspect Ratio0.75:11:1
Smallest Laser Microvia Hole Size0.0040.0025
Laser Via Aspect Ratio (Depth:Diameter)0.75:11:1

NOD Electronics is an experienced PCB and PCBA manufacturer in Shenzhen, China. After several years' developing and improving, our company establishes our main business in three principal areas-Printed Circuit Boards, PCB Assembly and Components Procurement. From prototype to mass production, we are able to gurantee a complete service with technical back up, offering a cost advantage and continuity of supply.


Contact NOD Electronics Now!