Organic Coating PCB Manufacturing

Organic coating is a vanishingly thin protective coating, applied just to the bare copper, which disappears during the actual soldering process. Such protective coats are applied by roller coating or dipping in a dilute solution, taking care that the surface is clean.

Laminate : CEM-1
Type : Rigid
Layers : Double-sided
Application : Others
Surface Finish : OSP
Copper Thickness : 2oz
Laminate Thickness : 1.0mm

Organic Coating PCB Manufacturing

In recent years, the development in material and new processes has enabled consumer electronics products to be coated as well. This will be becoming more common and will become a norm as circuitry and electronic components continue to shrink in size and dimension.

Organic coating is a vanishingly thin protective coating, applied just to the bare copper, which disappears during the actual soldering process. Such protective coats are applied by roller coating or dipping in a dilute solution, taking care that the surface is clean. The optimum thickness for such coatings is of the order of 0.5mm. This thickness provides adequate protection against fingerprints without hindering the action of the flux. Coating thickness can be determined by weighing a metallic test plate before and after coating, provided that the density of the dried solids of the coating solution is known.

Our Capabilities of Organic Coating PCB Manufacturing

Total Pad SizeStandardAdvanced
Capture PadDrill + 0.008Drill + 0.006
Landing PadDrill + 0.008Drill + 0.006
BC Mechanical Drill (Type III)0.0080.006
Laser Drill Size0.004-0.0100.0025
Material Thickness0.00350.0025
Stacked ViaYesYes
Type I Capabilities single & Double DeepYesYes
Type II Capabilities Buried Vias with MicroviasYesYes
Type III CapabilitiesYesYes
Copper Filled MicroviaYesYes
Smallest Copper Filled Microvia0.0040.0025
Copper Filled Microvia Aspect Ratio0.75:11:1
Smallest Laser Microvia Hole Size0.0040.0025
Laser Via Aspect Ratio (Depth:Diameter)0.75:11:1

Costs and Quotation of Organic Coating PCB Manufacturing

The total costs of organic coating PCB manufacturing and assembly services are mainly determined by PCB dimension, laminate thickness, surface finish, layer(s), other special technical requirements (such as blind & buried via, impedance), components, numbers of soldering pads and test plan. You can send PCB files (Gerbers) and BOM to get instant quotation within 24 hours

NOD Electronics has led the PCBA industry for over 25 years, providing some of the most innovative printed circuit board technologies and highest quality standards found in the industry today. You can count on us to cater to your specific needs, from the simplest boards to the most complex designs for small quantity and large scale production.



TAG:   PCB Manufacturing PCB