Drone PCB Manufacturing
  • Detailed information

    Drone PCB Manufacturing

    Drones are growing in popularity among average consumers, but for now their usage is limited to photography and videography and little more. PCB manufacturers must be ready and capable of producing circuit boards that perform flawlessly under pressure to avoid any missteps that can have potentially fatal consequences.

     Our Capabilities of Drone PCB Manufacturing

    Total Pad SizeStandardAdvanced
    Capture PadDrill + 0.008Drill + 0.006
    Landing PadDrill + 0.008Drill + 0.006
    BC Mechanical Drill (Type III)0.0080.006
    Laser Drill Size0.004-0.0100.0025
    Material Thickness0.00350.0025
    Stacked ViaYesYes
    Type I Capabilities single & Double DeepYesYes
    Type II Capabilities Buried Vias with MicroviasYesYes
    Type III CapabilitiesYesYes
    Copper Filled MicroviaYesYes
    Smallest Copper Filled Microvia0.0040.0025
    Copper Filled Microvia Aspect Ratio0.75:11:1
    Smallest Laser Microvia Hole Size0.0040.0025
    Laser Via Aspect Ratio (Depth:Diameter)0.75:11:1

    Costs and Quotation of Drone PCB Manufacturing

    The total costs of drone PCB manufacturing and assembly services are mainly determined by PCB dimension, laminate thickness, surface finish, layer(s), other special technical requirements (such as blind & buried via, impedance), components, numbers of soldering pads and test plan. You can send PCB files (Gerbers) and BOM to get instant quotation within 24 hours.

    NOD Electronics has rich work experience in PCB prototype, not only embodies in the technology of PCB prototype, but also on the international influence about PCB prototype. NOD Electronics put the high quality as its priority criteria, in China PCB assembly has been very good reputation. Looking for Guangzhou High Temp PCB prototype with ISO9001 approval, don't miss NOD Electronics' PCB prototype. NOD Electronics guarantee that give you high quality, the most ideal Guangzhou High Temp PCB prototype with ISO9001 approval.


Drone PCB Manufacturing

Drones are growing in popularity among average consumers, but for now their usage is limited to photography and videography and little more.


Copyright 2009-2024 All Rights Reserved by NOD Electronics
Building A01 & C03, Ping’an Silicon Valley, Zengcheng District, Guangzhou 511399, China
Powered by MetInfo 7.2.0 ©2008-2024  mituo.cn