24 HOURS QUICK TURN PCB PROTOTYPE
NOD Electronics fully understands your quick design-to-market need and offers PCB prototype services, ready in 24 hours for common PCBs and less than 3 days for complex boards. Advanced factory facilities allow us to deal with 1,000+ prototype orders daily and would not sacrifice quality.
PCB PROTOTYPE FOR STANDARD BOARDS
| Layer(s) | Laminate | Copper | Surface | Thickness | Cost | Lead Time |
| Single | FR-4 | 1oz, 2oz | HASL, ENIG | 0.4~2.0 mm | $1.5/piece | 1 day |
| Double | FR-4 | 1oz, 2oz | HASL, ENIG | 0.4~2.0 mm | $2/piece | 1 day |
| 4 | FR-4 | 1oz, 2oz | HASL, ENIG | 0.4~2.0 mm | $10/piece | 4~5 days |
| 6 | FR-4 | 1oz, 2oz | HASL, ENIG | 0.4~2.0 mm | $25/piece | 6~7 days |
| For very urgent order, additional engineering cost $30 would be charged. | ||||||
CONTACT US TO GET INSTANT QUOTE
PCB PROTOTYPE FOR CUSTOM & COMPLEX BOARDS
Your complex PCB design would be widely supported here by our custom boards prototype team. We will do DFM checks for FREE and generally custom & complex boards prototype cost will be under $100 USD. You can also get a report of design improvements.
| Aluminum PCB | HDI | High Tg | |||
| FPC | Impedence control | Golden Finger | |||
| Rigid-Flex | Buried/blind vias | Standard | > Class 2 | ||
| Trace & Spacing | < 3 mil | Resin filled via | Quantity | No MOQ |
PCB PROTOTYPE SAMPLES
6 Layers/HDI PCB/FR-4/1oz/ENIG
2 Layers/4oz Copper Weight/FR-4/ENIG
4 Layers/1oz/FR-4/ENIG/BGA Vias
4 Layers/FR-4/1oz/ENIG/3mil trace
2 Layers/FR-4/1oz/ENIG/Blue Solder Mask
2 Layers/1oz/FR-4/ENIG/1.6mm/Standard PCB
4 Layers/1oz/FR-4/2.0mm/HASL/Red Solder Mask
Flexible printed circuit board with populated steel sheet
CONTACT US TO GET INSTANT QUOTE
Our PCB prototype services are widely integrated into industries such as auto, communication, robotics, IOT, system control, solar power, electricity, consumer products, instrument & devices etc. We got certificates UL, ISO9001:2015, ISO14001:2004, IATF16949 and RoHS.
FAQs OF PCB PROTOTYPE
When can I cancel order and get refund?
Should I need design PCB panel and then pass gerbers for production?
Can you help arrange international logistics of the PCB prototype?
