pcba

24 HOURS QUICK TURN PCB PROTOTYPE

NOD Electronics fully understands your quick design-to-market need and offers PCB prototype services, ready in 24 hours for common PCBs and less than 3 days for complex boards. Advanced factory facilities allow us to deal with 1,000+ prototype orders daily and would not sacrifice quality.

PCB PROTOTYPE FOR STANDARD BOARDS

Layer(s)LaminateCopperSurfaceThicknessCostLead Time
SingleFR-41oz, 2ozHASL, ENIG0.4~2.0 mm$1.5/piece
1 day
DoubleFR-41oz, 2ozHASL, ENIG0.4~2.0 mm$2/piece
1 day
4FR-41oz, 2ozHASL, ENIG0.4~2.0 mm$10/piece
4~5 days
6FR-41oz, 2ozHASL, ENIG0.4~2.0 mm$25/piece
6~7 days
For very urgent order, additional engineering cost $30 would be charged.

CONTACT US TO GET INSTANT QUOTE


PCB PROTOTYPE FOR CUSTOM & COMPLEX BOARDS

Your complex PCB design would be widely supported here by our custom boards prototype team. We will do DFM checks for FREE and generally custom & complex boards prototype cost will be under $100 USD. You can also get a report of design improvements.

Aluminum PCBHDI
High Tg
FPCImpedence controlGolden Finger
Rigid-FlexBuried/blind viasStandard
> Class 2
Trace & Spacing< 3 milResin filled viaQuantityNo MOQ


PCB PROTOTYPE SAMPLES

  • 6 Layers/HDI PCB/FR-4/1oz/ENIG

  • 2 Layers/4oz Copper Weight/FR-4/ENIG

  • 4 Layers/1oz/FR-4/ENIG/BGA Vias

  • 4 Layers/FR-4/1oz/ENIG/3mil trace

  • 2 Layers/FR-4/1oz/ENIG/Blue Solder Mask

  • 2 Layers/1oz/FR-4/ENIG/1.6mm/Standard PCB

  • 4 Layers/1oz/FR-4/2.0mm/HASL/Red Solder Mask

  • Flexible printed circuit board with populated steel sheet

CONTACT US TO GET INSTANT QUOTE


Our PCB prototype services are widely integrated into industries such as auto, communication, robotics, IOT, system control, solar power, electricity, consumer products, instrument & devices etc. We got certificates UL, ISO9001:2015, ISO14001:2004, IATF16949 and RoHS.

FAQs OF PCB PROTOTYPE

When can I cancel order and get refund?

As long as PCB prototype order has not been passed to production line, you can cancel order and get refund.

Should I need design PCB panel and then pass gerbers for production?

No, you don't need to do this. We will help you if necessary.

Can you help arrange international logistics of the PCB prototype?

Yes, we will arrange shipment by UPS, FedEx, DHL etc. and shipping cost would not be high.



Copyright 2009-2020 All Rights Reserved by NOD Electronics
Building E, Qixing Industrial Area, Xintang Town, Zengcheng District, Guangzhou 511340, China
Powered by MetInfo 7.2.0 ©2008-2024  mituo.cn