3 minutes quick start of solder paste inspection system SPI

3 minutes quick start of solder paste inspection system SPI

Publish Date:2019-08-30 15:58:36 Clicks: 245

solder-paste-inspection-system-SPI.jpg

1. The plug should be inserted into the AC 220V power supply. Turn on power by rotating the red main switch at the bottom of the machine clockwise. 

2. Turn on the power of computer, and UPS will be turned on automatically. 

3. After the win7 operating system is started, double click the “3D detection” icon on the desktop. Wait until machine reset finished, software window will pop up automatically. 



Copyright 2009-2020 All Rights Reserved by NOD Electronics
Building E, Qixing Industrial Area, Xintang Town, Zengcheng District, Guangzhou 511340, China
Powered by MetInfo 7.2.0 ©2008-2023  mituo.cn