Organic Coating PCB Manufacturing
  • Detailed information

    Organic Coating PCB Manufacturing

    In recent years, the development in material and new processes has enabled consumer electronics products to be coated as well. This will be becoming more common and will become a norm as circuitry and electronic components continue to shrink in size and dimension.

    Organic coating is a vanishingly thin protective coating, applied just to the bare copper, which disappears during the actual soldering process. Such protective coats are applied by roller coating or dipping in a dilute solution, taking care that the surface is clean. The optimum thickness for such coatings is of the order of 0.5mm. This thickness provides adequate protection against fingerprints without hindering the action of the flux. Coating thickness can be determined by weighing a metallic test plate before and after coating, provided that the density of the dried solids of the coating solution is known.

    Our Capabilities of Organic Coating PCB Manufacturing

    Total Pad SizeStandardAdvanced
    Capture PadDrill + 0.008Drill + 0.006
    Landing PadDrill + 0.008Drill + 0.006
    BC Mechanical Drill (Type III)0.0080.006
    Laser Drill Size0.004-0.0100.0025
    Material Thickness0.00350.0025
    Stacked ViaYesYes
    Type I Capabilities single & Double DeepYesYes
    Type II Capabilities Buried Vias with MicroviasYesYes
    Type III CapabilitiesYesYes
    Copper Filled MicroviaYesYes
    Smallest Copper Filled Microvia0.0040.0025
    Copper Filled Microvia Aspect Ratio0.75:11:1
    Smallest Laser Microvia Hole Size0.0040.0025
    Laser Via Aspect Ratio (Depth:Diameter)0.75:11:1

    Costs and Quotation of Organic Coating PCB Manufacturing

    The total costs of organic coating PCB manufacturing and assembly services are mainly determined by PCB dimension, laminate thickness, surface finish, layer(s), other special technical requirements (such as blind & buried via, impedance), components, numbers of soldering pads and test plan. You can send PCB files (Gerbers) and BOM to get instant quotation within 24 hours

    NOD Electronics has led the PCBA industry for over 25 years, providing some of the most innovative printed circuit board technologies and highest quality standards found in the industry today. You can count on us to cater to your specific needs, from the simplest boards to the most complex designs for small quantity and large scale production.


Organic Coating PCB Manufacturing

Organic coating is a vanishingly thin protective coating, applied just to the bare copper, which disappears during the actual soldering process. Such protective coats are applied by roller coating or dipping in a dilute solution, taking care that the surface is clean.


Copyright 2009-2020 All Rights Reserved by NOD Electronics
Building E, Qixing Industrial Area, Xintang Town, Zengcheng District, Guangzhou 511340, China
Powered by MetInfo 7.2.0 ©2008-2021  mituo.cn