Lead-Free Solder: Solder with NO Lead (Pb). Lead-Free is taking rapid momentum around the world after the EU (European Union) Directives to wipe off lead (Poison) from electronic soldering considering...

Equipment unique to surface mounting includes inspection and repair / rework equipment. Inspection equipment for surface mounting in electronics has not matured yet. There are two main types of automa...

There are three types of Surface Mounting: Type 1, Type II and Type III.For Type III surface mount, components glued to the bottom of the board require curing before wave soldering. In addition, ...

A reflow soldering equipment / machine is the second major equipment after pick-and-place machine in any SMT line.There are many reflow soldering methods and each method has advantages and disadvantag...

Wave soldering is the most widely used method in electronics industry for soldering through-hole electronic components. Components glued to the bottom of a mixed-technology PCB require...

After soldering, the electronic assemblies must be cleaned to remove excess solder flux. The subjects of flux and cleaning are closely intertwined. The selection of solvent and cleaning equipment...

About Soldering StationA soldering station is a soldering tool with a separate station to control temperature and a soldering iron. A soldering station can be either anal...

A Solder Paste Screen Printer for SMT is needed to screen solder paste onto the printed circuit board (PCB) before placement of surface mount components.Solder Paste Screen Printer for SMT have been w...